USED AND NEW SHEET METAL WORKING MACHINES TRADE
000
Presses Brake
| COD. | BRAND | Machines | DESCRIPTION | |
 |
ITA4319 | 000 | 3000X40 PRESS BRAKE GASPARINI |
COMPLETE WITH 2 MANUAL REAR REGISTERS,
NO PHOTOCELLS
FALLS DOWN, SLOW DOWN AND BACK
MANUAL AND AUTOMATIC
|
 |
ita 934 | 000 | HAMMERLEE 3000X100PRESS BRAKE | HYDRAULIC, WITH 3 AXIS CONTROL, WITH PUNCHES AND DIES |
 |
camp | 000 | 1500X2HYLLUS PRESS BRAKE | |
 |
ITA 4184 | 000 | PRESS BRAKE 4000X30 HYDRAULIC |
COMPLETE WITH BLADE AND VALID PRISM
3 SIMPLE REAR ADJUSTMENTS
INCAVO 530, PASSAGE BETWEEN THE SHOULDERS 3050
OVERALL DIMENSIONS 1300 X 4100 X H 2200, WEIGHT 40 Q.LI ABOUT
|
 |
ITA4318 | 000 | 4000X150 PRESS BRAKE OMAG GATTI |
COMPLETE WITH BLADE AND PRISM A VARIOUS CAVE + 1 BEFORE 130X130 WITH CAVA DA 95
FRONTAL REMOVABLE PRISMA DOOR, COMPLETE WITH 2 MANUAL REAR VIEWS, FAST DOWNWAY, SLOWLY
PRESS AND RETURNS, DOES AUTOMATIC AND MANUAL.
THE BASE DRIVES 500 MM FROM FLOOR, HYDRAULIC MACHINE WITH BAR OF
TWIST
OVERALL DIMENSIONS 1400X4100XH 2880 + 500 THE FRONT (REMOVABLE)
MACHINE WEIGHT 98 Q.LI
"BASE 32 Q.LI
"BLADE AND PRISM 6 Q.
TOTAL 140 Q.LI ABOUT
|
 |
ITA4289 | 000 | GATTI OMAG PRESS BRAKE4000X180 | HYDRAULICIT FITS DOWN QUICKLY, SLOWLY AND PRESSES THEN FAST RETURNS, CAN WORK IN AUTOMATIC AND MANUAL
COMPLETE WITH BLADE AND GOOD PRISM,
2 MANUAL REAR REGISTERS, AUTOMATIC LUBRICATION
THE PRISMA DOOR CAN BE REMOVED WITH 6 SCREWS
150Q MACHINE WEIGHT. ABOUT
40Q PRISMA PORT ABOUT
MEASURE 4100X1800XH3050
OVERALL DIMENSIONS 4100X1700 WHEN THE MACHINE IS INSTALLED DOOR THE PRISMA DOOR GOES UNDER THE X 400MM FLOOR?
TOTAL WEIGHT 190Q MACHINE.
|
 |
ITA4173 | 000 | 3000X25 OMAG PRESS BRAKE | COMPLETE WITH BALDE AND PRISM +2 REAR MANUAL REGISTER WITH LATERAL CARTERS NO PHOTOCELLS SIZE 850X3100XH1900 WEIGHT 30Q. APPROXIMATED DATA |
 |
ITA 3679 | 000 | UNIVERSAL PRESS 3000X75 | HYDRAULIC, WITH BACK REGISTER |
Shears
| COD. | BRAND | Machines | DESCRIPTION | |
 |
ITA 3986 | 000 | MANUAL SHEAR1000X1.5 | |
 |
ITA4150 | 000 | BL3000X4 SHEAR | HYDRAULIC, DIGITAL BACK REGISTER, CAVITY500 |
 |
ITA4272 | 000 | BPM SHEAR 1000X2 | MECHANICS , PNEUMATIC CLUTCH COMPETE WITH SUPPORT BARS REAR MANUAL REGISTER, SHORT HOLLOW SIZE 1600X1200XH1200 WEIGHT 450KG APPROXIMATE DATA |
 |
ITA4233 | 000 | SHEAR 1300X1 | WITH ENGINE SELFBRAKING COMPLETE WITH PEDAL AND POSTERIOR MANUAL REGISTER MECHANICAL BLANK HOLDER MACHINE COMPLETE WITH SUPPORT BARS SHEET METAL CUTTING 90° SIZE 1680X8000XH1200 WEIGHT 600KG APPROXIMATE DATA |
 |
ITA 3898 | 000 | GATTI SHEAR 2000X4 | CAVITY 250, MANUAL REGISTER, PNEUMATICH CLUTCH |
 |
ITA4041 | 000 | GATTI SHEARS 4000X4 | PNEUMATIC CLUTCH, CAVITY 500 MOTORIZED REGISTER, MECHANICAL SHEET-PRESSERS MANUAL LUBRIFICATION, COMPLETE WITH SUPPORTS AND BAR FOR 90 DEGREES CUTS SIZE 5000X1800X1800 WEIGHT 11 TON APPROXIMATED DATA BUSHINGS REPLACED, SHARP BLADES, MADE NEW CARTERS, EVERYTHING WAS CHECKED |
 |
ITA3009 | 000 | COLLY HYDRAULIC SHEAR |
MOD. 3006.
Useful cutting length: 3050 mm.
Thickness max. cutting: 5 mm.
Register stroke: 500 mm.
DIGITAL motorized back register
Used.
Sharpened blades with interaxis blades, complete with supports
|
 |
ITA4124 | 000 | HYDRAULIC VERRINA SHEARS 300X20 | REAR DIGITAL MOTORIZED REGISTER 1000 WITH PRG 910 , HYDRAULIC SHEET-PRESSER CAVITY 300 , MACHINE COMPLETE WITH BAR FOR 90 DEGREES CUTS°AND 3 SUPPORT BARS ,SHARP BLADES ,READY TO USE SIZE WIDTH2600XLENGHT3770XHEIGHT2470 WITH HYDRAULIC CONTROL UNIT ON TOP (IT CAN BE EASILY) 1580X780+910+ TOTAL ENGINE H1450 WEIGHT EMPTY 600KG MACHINE WEIGHT 204Q. COMPLETE 210Q. NOT PAINTED NS.RIF.4124/VENT/AGO.17 |
 |
ITA4285 | 000 | SHEAR ILMA3000X3 |
PRG910 DIGITAL MOTORS REGISTER
SHARP BLADES, SHORT END,
COMPLETE WITH BARS FOR CUTTING 90 DEGREES AND 2 OF SUPPORT,
LATER INTERSPACE ADJUSTMENT, RAPID WITH LEVER, RIPARS ON THE LATERAL FRONT
OVERALLS 1500 + 600X3400XH1700 WEIGHT 45Q. APPROXIMATE DATA
|
 |
ITA4242 | 000 | IMAL SHEAR 3000X12 | PNEUMATIC CLUTCH, HYDRAULIC BLANK HOLDER, POSTERIOR MOTORIZED REGISTER, HOLLOW 500, COMPLETE WITH CUTTING BAR 90° AND 2 SUPPORT BARS, REGISTERED AND SHARP BLADES, WITH A COUPLE OF USED SPARE BLADE, COMPLETE WITH ALL THE PROTECTIONS, ORIGINAL PAINT, READY TO USE, SIZE 3700X2100XH2000, VERIFIED WEIGHT 154 Q.LI |
 |
ITA4343 | 000 | IMAL 3000X12/16 SHEAR | CAVITY500, DIGITAL MOTORIZED REGISTER COMPLETE WITH VARIOUS PROTECTIONS AND BARS OF SUPPORT + BARS X CUTTING 90 ° OVERALL DIMENSIONS 2200X3500XH2350 APPROXIMATE DATA , WEIGHT 164 QUINTALS weighing |
 |
ITA 3606 | 000 | INDUMAC SHEAR 3000X4 | BLANK HOLDER HYDRAULIC,REAR REGOISTER POWERED, CAVITY500 |
 |
ITA4170 | 000 | MANUAL SHEAR1000X2 | MANUAL REGISTER, IRON BASE MEASURES 2000X1000XH1200 WEIGHT250KG APPROXIMATED DATA |
 |
ITA4024 | 000 | 3000X4 DAVI SHEAR | CAVITY 500, MOTORIZED REGISTER |
 |
ITA3810 | 000 | OMAG HYDRAULIC SHEARS 3000X16/20 | BLADE INTERPACE WITH CRANK, REAR MOTORIZED REGISTER MM 1000 NO CAVITY, COMPLETE WITH SUPPORT SPABBER MODERN MACHINE, HASN'T WORKED MUCH SIZE 3900X2200XH3000, WEIGHT 165 Q. ROUGHLY |
 |
ITA4342 | 000 | OMAG GATTI SHEAR | Marca/make Omagatti Modello/type 207 CNH Matricola/serial number 1103 Capacità/capacity 2500 x 7 mm Lunghezza/width 2500 mm Spessore/thickness 7 mm Registro Motorizzato/motorized back gauge Interspazio Lame Motorizzato/motorized blades adjustment |
 |
ITA3657 | 000 | REMOR MANUAL SHEARS | WITH 1000 BLADE WITH SHEET-PRESSER CRANK BEAT REGISTER 1000X12000XH800 WEIGHT 250 KG |
Hydraulic Presses
| COD. | BRAND | Machines | DESCRIPTION | |
 |
ITA3820 | 000 | 4 COLUMNS PRESS DIAM. 80 | H 1600 ALL OPEN ON THE MOBILE PLANE 1200 PASSAGE BETWEEN COLUMNS 970X920 SIZE 1400X1150XH3000 ON THE CONTROL UNIT HANGING PUSHBOTTON HYDRAULIC INFERIOR MOBILE PLANE PRESSED HAPPENS THROUGH SCREW RECYCLING SPHERES DIAM. 40 IT IS SUPPOSED TO DO 10/20 TON MACHINE LIKE NEW |
 |
ITA3827 | 000 | 120 TON HYDRAULIC PRESS |
LIGHT ALL OPEN 580
750 X 900 FLOOR (YOU CAN REMOVE)
INCAVO FROM THE CENTER 780
CYLINDER DIAM.230 LED
LEVER CONTROL
|
 |
MIT 2097 | 000 | BENAG 250 PRESS | HYDRAULIC,2 STUDS, LIGHT BETWEEN SHOULDERS 800X800 |
 |
MAG/OS | 000 | CAVENAGHI RIDOLFI 300 TON PRESS | DA1650X1200 PLANS ALL OPEN LIGHT 1150 CYLINDER STROKE 1100 DIAM 400 APPROX HP60 MAIN ENGINE REWARDS 300+ STEEL SHEET WITH 4 CYLINDERS GO DOWN QUICKLY, SLOW DOWN PRESS AND RETURN FAST LOVELY PAINT THE MACHINE WAS IN FUNCTION, SEE VIDEO COMPLETE WITH VARIOUS CARTERS COMPLETE MACHINE WITH USE AND MAINTENANCE BOOKS, ELECTRICAL AND HYDRAULIC DIAGRAMS |
 |
ITA3884 | 000 | HYDRAULIC PRESS 1200 | COMPLETE WITH ELECTRICAL CABINET AND HYDRAULIC CONTROL UNIT DIAM. CYLINDER 900MM , CYLINDER RUN 600 THE CYLINDER COMES FROM BELOW AND GOES UP REPORTED PLAN 1350X1450XH180 PASSAGE BETWEEN SHOULDERS 1550 MAX OPEN LIGHT 730 PLANS INCLUDED SIZE 2600X1950XH3100 , WEIGHT 320 Q.LI ROUGHLY |
 |
ITA950 | 000 | HYDRAULIC 20,4COLUMNS PRESS | ALL OPEN LIGHT 700, STROKE 500 |
 |
ITA3911 | 000 | 4 COLUMNS HYDRAULIC PRESS | ALLOPEN LIGHT 900, TABLE 1250X1250 |
 |
ITA 1221 | 000 | HYDRAULIC 20/30 PRESS | STROKE350,EQUIPPEND TO BEND70X10 PLATE EDGE ON |
 |
ITA 1708 | 000 | DOPPELMAYER200 HYDRAULIC PRESS | |
 |
ITA 1650 | 000 | HYDRAULIC MULLER 60 PRESS | ALL OPEN LIGHT700, TABLE 600X600 |
 |
mar19 | 000 | MURARO 120 TON PRESS |
PLAN DA1000X800
PIANO MOBILE 1000X600
DRIVEN WITH 2 COLUMNS DIAM100
CORSA800?
ALL-OPEN LIGHT 1100
DIAM200 CYLINDER
MACHINE WITH REWARDS, WITH VARIOUS HOLES CANDLE PASSES
PROJECTION AT THE TABLE CENTER 500
INGOMBRO2200X1200XH3850 + 850 DIRT WEIGHT 100Q. APPROXIMATE DATA
TUBES AND CYLINDER BELOW
|
 |
ITA4020 | 000 | HYDRAULIC PRESS OMB 63 | TABLE 750X700,ALL OPEN LIGHT700,POKER TOUR FULL METAL AWARDS |
 |
ITA3823 | 000 | SASPOL HYDRAULIC PRESS | MOD. TC 50 D MATR. 1324 YEAR 2001 MOBILE PLAN 600 X 600 COLUMNS INCLUDED 4 COLUMNS DIAMETER: 80 PISTON DIAMETER: 180 ENGINE: 15 CV SIZE: 1300X1650X2780 WEIGHT: 30Q MACHINE WITH USE AND MAINTENACE BOOK |
 |
MIT 2405 | 000 | HYDRAULIC 50/60 PRESS | |
 |
ITA 1499 | 000 | UNIVERSAL PRESS63 | ALL OPEN LIGHT500, TABLE 600X800 |
 |
ITA 1486 | 000 | HYDRAULIC ATREMA100 PRESS | ALL OPEN LIGHT700, TABLE 850X680 |
 |
ITA 1322 | 000 | HYDRAULIC BENAG 400 PRESS | LIGHT BETWEEN SHOULDERS500X500, STROKE CYLINDER600,ALL OPEN LIGHT700 |
 |
ITA3947 | 000 | PRESS FOR BROACHING | IS INSTALLED ON THE TABLE STROKE ABOUT 600 SIZE 800X1600XH2000 WEIGHT 200 KG APPROXIMATE DATA |
 |
FAN/ITA 3826 | 000 | PRESS FOR PAPER OR ALUMINUIM CHIPS | VALUABLE LOADED FROM THE TOP PRESSES WITH HYDRAULIC UNIT MAKES 600X600X900 BALES THEY ARE MANUALLY TIED SIZE 3200X800XH1400, WEIGHT 800 KG |
 |
ITA3864 | 000 | ORMIG PAPER PRESS | MAKES 1000X700 BALES APPROXIMATED MEASURES 1600X800XH3000 WEIGHT 500KG GOES UP AND DOWN TROUGHT LEVER |
 |
ITA3786 | 000 | PRESS |
LOWER SLIDING FLOOR 1200X1200
STROKE 1000
UPTAKE UPPER FLOOR BY HYDRAULIC PISTON FROM 1200X1200
PASSAGE FRA COLUMNS 1280X740
LIGHT ALL OPEN 1250
CYLINDER STROKE 1000
DIAM.CILINDRO 160
DIAM.COLONNE 100
ALL CONTROLS ARE THROUGH MANUAL LEVERS
OVERALL DIMENSIONS 2400X2200X H 2900 + CYLINDER 700, WEIGHT 7500 KG
|
Clutch Presses
| COD. | BRAND | Machines | DESCRIPTION | |
 |
ITA 1176 | 000 | CMP 80 PRESS CLUTCH | FLYWHEEL, 4GUIDES, STROKE 80-100 |
 |
mag11119 | 000 | clutch press | |
 |
ITA 1490 | 000 | MAYPRESS 100PNEUMATIC CLUTCH PRESS | 640X400 PLANE, ALL OPEN LIGHT350, FIXED STROKE 100 |
 |
ITA 1877 | 000 | WEINGARTEN 75 PNEUMATIC CLUTCH PRESS | DUAL ELECTROVALVE,STROKE 10-130 |
 |
ITA4195 | 000 | 10 TON PRESS SAN GIACOMO |
RACE FROM 5 TO 40
PIANO 300 X 200
LIGHT 200
OVERALL 700X700XH 1400
WEIGHT 400 KG
|
 |
ITA 590 | 000 | WHALI AUTOMATIC PRESS | SPEED, STROKESPER MINUTES500, FIXED STROKE 20MM |
 |
ITA4103 | 000 | ADDA 120 TON PRESS | PNEUMATIC CLUTCH , TABLE 920X550, ALL OPEN LIGHT500 |
 |
ITA 3912/3 | 000 | WWW BULGARA 65 PRESS | PNEUMATIC CLUTCH, ALL OPEN LIGHT400, STROKE 10-120 |
 |
1851 | 000 | ECCENTRIC PRESS 26 TON (BRAKE-CLUTCH) ON THE FLY | SEPARATE AIR BRAKE ADJUSTABLE RUN WITH REPORTED PLAN PAINTED LEGS AND TANK, NEW PUSHBUTTONS SINGLE BODY SOLENOID VALVE TURNS WELL, WORKS WELL |
 |
ITA4099 | 000 | OMET 40 TON PRESS TYPE PEI | PNEUMATIC CLUTCH, ALL OPEN LIGHT 400, POKER300X300 |
 |
ITA4217 | 000 | IMV PNEUMATIC CLUTCH ECCENTRIC PRESS 80TON | MAX OPEN LIGHT 460 RUN MM100 BEATS 40A 129 ENGINE HP7 (INCLINABLE) STEEL FRAME 850X650 PLAN REAR CLUTCH SIZE 1450X1000XH2300 + ENGINE WITH SPEED REGULATOR WEIGHT 50Q APPROXIMATED DATA |
 |
4103 | 000 | ADDA ECCENTRIC PRESS 120 TON | 920X550 PLAN, MAX OPEN LIGHT 500, WITH OVERPLAN 2 GUIDES RAM, RAM PLAN 600X400 AUTOMATIC LUBRIFICATION, OIL BATH GEARS COLUMNS COUPLING NEEDS FIXING, PAINTED ONLY ON THE BASE SIZE 1400X1650XH2550, WEIGHT 5000 KG |
 |
ITA895 | 000 | MINSTER ECCENTRIC PRESS 100 | GOOSENECK,PNEUMATIC CLUTCH, 4 GUIDES RAM |
 |
ITA1414 | 000 | RISPO 130T ECCENTRIC PRESS | GOOSENECK STEEL MACHINE WITH INCREASED TABLE AND LIGHT DUAL ELECTROVALVE CONSOLE COMMANDS AIR BALANCE RECLINING MACHINE WITH HYDRAULIC UNIT 4-GUIDES RAM WITH MOTIRZED REGULATION BOLSTER PLATE 900X1300 ALL OPEN LIGHT 800 CENTRAL PROMINENCE 450 ADJUSTABLE STROKE 0 -140 STROKES 55 , HP 15+1.5 GOOD MACHINE MEASURES 2750X1300XH3000+ CYLINDER AND MOTOR, WEIGHT 13000 KGS |
 |
MIT3370 | 000 | FIAT125 PRESS | USED, CLUTCH, 2STUDS, FIXED STROKE 125MM |
 |
ITA 4267 | 000 | 100 TON PRESS RISPO |
4 GUIDE
WITH HYDRAULIC PLANT
POKER MOTORIZED
PLAN 1100X650
LIGHT OPEN ALL 450
ADJUSTABLE TRAVEL 20 TO 150
FRONT TREE
CONSOLE CONTROLS
MACHINE NOT ROUNDED, BUT TO BE ACCOMPLISHED
INGOMBRO1400X1400XH .... APPROXIMATE DATA
|
 |
ITA1489 | 000 | 100RUSSIAN PRESS | BACK GEARED,PNEUMATIC CLUTCH, ADJUSTABLE STROKE 10-130 |
Feeders and Straightening
| COD. | BRAND | Machines | DESCRIPTION | |
 |
....12 | 000 | 220X220FEEDER | |
 |
..111 | 000 | 400X400FEEDER | |
 |
ITA 3798 | 000 | FEEDER PNEUMATIC LEVELER | |
 |
AR3 | 000 | PAPER DECOILER | |
 |
ITA4061 | 000 | 2 ROLLERS CALANDER RW | PROTECTIONS WITH CARTER E SPECIAL MICRO |
 |
ITA 4181 | 000 | HYDRAULIC CALANDER | 3 ROLLS, MOD G310 NEW, LIGHT 3100, 380V |
 |
SC/GIUG | 000 | FACCIN 2000X8/10CALANDER |
WITH 3 HYDRAULIC MOTORS
2 MOVABLE LOWER ROLLERS WITH THRUST
WITH DIAM 220 CYLINDERS
1 DIAM185 TRAINER ROLLER
HYDRAULIC UPPER ROLLER RELEASE, HYDRAULIC UPPER ROLLER LIFT.
CONSOLE CONTROLS WITH PUSH-BUTTON PANEL AND DOUBLE PEDAL.
THE MACHINE WILL BE EQUIPPED WITH A CORDICELLA WITH A SAFETY MICRO DEVICE
HP15 MAIN ENGINE
|
 |
ITA4113 | 000 | IMCAR CALANDER | |
 |
SCOT/G | 000 | IMCAR 2000X6/8CALANDER |
BRAKE MOTOR
DIAM180 3-ROLLER DRIVERS, HYDRAULIC UNLOCK, HYDRAULIC UPPER ROLLER 2 SIDE BARS WITH SAFETY MICROS2 MOTORIZED MOBILE SIDE ROLLERS HP7.5 MAIN ENGINE |
 |
ITA4288 | 000 | IMCAR2500X20 CALANDER |
DIAM RULLI 330, N. 3 TRAINANTI
HYDRAULIC RELEASE WITH CONTROL UNIT
HYDRAULIC LEVER CONTROLS FOR RELEASE AND LIFTING ROLLER,
SELF-BRAKING ROLLER MOTOR
2 MOTORS
LIFT INDEPENDENT ROLLS
WITH EMERGENCY, BUTTONS AND CORDICELLA WITH MICRO
OVERALL DIMENSIONS 5690X1820XH1850 WEIGHT180Q APPROXIMATE DATA
|
 |
ITA4303 | 000 | MG CALANDER HYDRAULIC | 4 ROLLERS MOD.MH 310 FROM 3100X10 / 8, USED, OVERHAULED, RE-INTRODUCED AS NEW, COMPLETE WITH TEMPERATED ROLLERS, HYDRAULIC CONICAL DEVICE, DIGITAL DISPLAYS QUATA SIDE ROLLERS, CONTROL PANEL ON WHEELS |
 |
19G | 000 | SERGI CALANDER |
4 ROLLERS MOD.C.I. MATR.1478 YEAR 2000
COMPLETE WITH FRAME CONTROL PANEL AND HYDRAULIC LIFT,
3 OR 4 ROLLERS ROLLERS, WORKING MACHINE READY FOR USE
|
 |
ITA 3765 | 000 | BENDER PROFILATES MACHINE 3 ROLLERS | 2 DRIVERS ARE FIXED, 1 IS MOTORIZED |
 |
ITA 3909 | 000 | RESURFACING SHEET | PASSAGE BETWEEN SHOULDERS 1700, 9+9 ROLLS |
Lathes
| COD. | BRAND | Machines | DESCRIPTION | |
 |
ITA4003 | 000 | LATHE | WAGON WITH VERTICAL AND CROSS TOWER WITH DOOR AND TOOLS |
 |
CAM C.V. | 000 | CLOVIS MERLI LATHE |
COMPLETE WITH SELF-CENTERING DIAM250
PLATEAU 4 INDEPENDENT JAWS
2 LUNETTE
TURRET WITH 5 TOOL HOLDERS
SWIVEL COUNTERPIECE
|
 |
ITA4292 | 000 | COLCHESTER 800X200 LATHE |
COMPLETE WITH SELF-CENTERING DIAM250
TOOL TURRET
SWIVEL AND FIXED COUNTER
REPLACED BEARINGS TO THE SPINDLE
WITH RIPARI AND MICRO ON THE AUTOCENTRANTE
SILENT MACHINE
TRIED
CHANGE SPEED OK, FILTER OK
OVERALL DIMENSIONS 1700X700XH1300 WEIGHT600KG APPROXIMATE DATA
|
 |
ITA3799 | 000 | CU500X1500 LATHE | FULL OF SELF, TOWER DOOR TOOLS |
 |
ITA4286 | 000 | GIANNA LATHE425X1500 | HEIGHT PUNTA UNDER HEAD 500 BAR HOLE DIAM.150 WITH RAPID ON THE WAGONS, GUIDES COVERED, COMPLETE WITH PROTECTIONS TO THE SELF-CONTROLLER AND TURRET, WITH MICRO SAFETY DEVICE, TURRET WITH 5 TOOL HOLDERS, FIXED COUNTERPETS AND COUNTERPUNTA WITH LARGE CONES TO THE SPINDLE + SECOND FLANGE SELF-CENTERING DOOR, 2 AXIS DISPLAYED MACHINE. |
 |
ITA 3814 | 000 | GM32 LATHE | 5TOOLS BAR+1 HOLE, WITH BAR LOADER |
 |
FRAS/MAG | 000 | SAG GRAZIANO 210X250X1500 LATHE |
WITH QUICK RELEASE ON THE WAGONS AND VELOCITY CHANGE ON THE SPINDLE COMPLETE MACHINE WITH TURRET TOOL HOLDER, TURNTABLE AND FIXED TAILSTOCK, 2 LUNETTE, PLATEAU 4 INDEPENDENT JAWS, SELF-CENTERING DIAM 250, REPAIR WITH MICRO ON THE TOWER AND ON THE AUTOCENTRANT, FRONTAL EMERGENCY MACHINE PERFERTLY WORKING, CONTROLLED AND READY TO USE. MACHINE COMPLETE WITH MACHINE BOOK AND MISCELLANEOUS KEYS
|
 |
ITA 3192 | 000 | MAS 165 LATHE | |
 |
ITA3892 | 000 | 2000X400 ER MINO LATHE | 500RAIL UNDER FULL HEAD, REVOLVING TAILSTOCK TURRET WITH TOOL CARRIER |
 |
ITA3754B | 000 | COLCHESTER MOSCAT1600 LATHE | 1000X240, COMPLETE OF FLIGHT RIGHT,TURNING TAILSTOCK, DIAMETER ATTAC HOLE 76 |
 |
ITA 3993 | 000 | LATHE PBR350X2000 | TOWER WITH TOOL, TAILSTOCK ROTARY, WATER PUMP |
 |
ITA4093 | 000 | BACH TO BURN DRUMS | |
 |
ITA4182 | 000 | LATHE FOR TURN DRUMS | WHEELS CHANGE BUS ECC BRAND COMEC TR2000 MAT A122 0201 DEL2001 CE COMPLETE WITH PROTECTIONS, WITH SAFETY MICRO, WITH AUTOMATIC ADVANCES WITH END OF STROKE COMPLETE WITH ELECTRIC HOIST FOR LOADING AND UNLOADING SIZE 1800X1400XH1400+PARANCO WEIGHT 700KG APPROXIMATE DATA |
 |
CAM/MAR19 | 000 | SAIMP LATHE175X1000 |
COMPLETE WITH SELF-CENTERING DIAM200 PLATEAU 4 INDEPENDENT JAWS TURRET WITH 5 TOOL HOLDERS TURNTABLE AND FIXED TAILPAD LUNETTA TO FOLLOW
|
 |
ITA4130 | 000 | SHENYANG LATHE (MACHINE TOOL WORKS) 2000X520 HEIGHT TIPS | WITH QUICKS ON THE WAGONS WITH PROTECTIONS ON THE WAGON COVERINGS ON THE SCREWS AND ON THE HEAD MACHINE CE COMPLETE WITH PLATEAU 4 JAWS DIAM.100, TOOL TURRET, SWIVEL AND FIXED COUNTER, ELECTRIC CABINET WITH CONSOLE IT HAS NOT EXTRACTABLE DUSK, IT CAN BE TURNED UNDERLY 1130 X 250 MM SIZE 4500X1650XH1850 WEIGHT ABOUT10 TON |
Drills And Radial Drills
| COD. | BRAND | Machines | DESCRIPTION | |
 |
ITA 3410 | 000 | 3 HEADS DRILL | CHUCK AND WATER PUMP |
 |
ITA3790 | 000 | AAVA TORINO COLUMN DRILL | ROUND TABLE |
 |
ITA 3551 | 000 | DRILL PRESS 20 | |
 |
ITA3791 | 000 | COLUMN DRILL 25 | |
 |
ITA4328 | 000 | BIMAK DRILL |
AUTOMATIC MANDREL DESCENT
UP AND DOWN MOTORIZED TABLE
COMPLETE WITH WATER PUMP
TABLE DA800X260
SHELTER WITH MICRO AL MANDRINO
EQUIPPED WITH 2-CASTLE BELL
|
 |
MIT2254 | 000 | BZ40 BERARDI DRILL | CONE MORSE4 |
 |
MARZOO19 | 000 | BERNARDO DRILL MOD BF30 SUPER |
MM850X210
MOTORIZED TABLE WITH SPEED VARIATOR AND DIGITALLY PROGRAMMABLE MOVEMENTS
MEASUREMENT TABLE 850X210
CE MACHINE, WITH BOOK AND DOCUMENTATION OF 2018
DIMENSION 1300X800XH1000 WEIGHT 230 KG APPROXIMATE
|
 |
ITA3836 | 000 | FAMUP RAG 40 COLUMN DRILL | 2 SPEED, RECTANGULAR TABLE |
 |
ITA3704 | 000 | RADIAL COLB 1300X35 DRILL | |
 |
ITA 3553 | 000 | RADIAL DRILL CSEPEL | |
 |
ITA4302 | 000 | MISAL RADIAL DRILL |
EMBRACE 1600 HOLE DIAM 32/40
CENTRALIZED LOCKINGS
COMPLETE WITH WATER PUMP AND CUBE DA600X700XH550 BEAUTIFUL.
GIRA WELL, CHANGE SPEED OK
CHANGE OF ADVANCES OK
AUTOMATIC STRIKE AVANZAMENTI OK
COLUMN AND HEAD LOCKING OK
VERY BEAUTIFUL COLUMN AND VITONE
BELLA ORIGINAL PAINT
INGOMBRO 3000X900XH2430 + ENGINE 300PESO MACHINE 45Q. TO CHECK
TO BE ASSEMBLED SHELF WITH MICRO AL MANDRINO
IS MADE OF 2 FRONTAL EMERGENCIES AND 2 ON THE BACK.
|
 |
ITA 3705 | 000 | 6 SPLINDES PINK DRILL | WITH MOBILE TABLE |
 |
ITA3673 | 000 | PINK DRILL 20 | MOBILE TABLE 900, WATER PUMP |
 |
ITA 4105/4106 | 000 | PINK DRILL | |
 |
ITA3979 | 000 | LTF DRILL | MACHINE ON TABLE, CE, MOD F25 DEL 2011 |
 |
ITA4108 | 000 | UNIMATIC DRILL | DRILL16, WATER PUMP, REVOLVING TABLE |
Milling Machines
| COD. | BRAND | Machines | DESCRIPTION | |
 |
ITA 1895 | 000 | MILLING MACHINE CNC ZEUS | UNIVERSAL HEAD ISO 50 |
 |
MAGGI19 | 000 | MILLING MACHINE MISAL735 |
TABLE 310X1500
QUICK ON THE CARRIERS COMPLETE LAPS DA21A1500 DISPLAYED ON THE THREE FAGOR WORKING AXES? TO TRY INGOMBRO1900X1900X1800 EXACT WEIGHT 23Q. CIRC |
 |
ITA 1838 | 000 | MILLING MACHINE GE. MI.V | TILT HEADS ISO 50, TABLE 1400 |
 |
MONT | 000 | MAHO MH500W2 MILLING MACHINE |
CNC
TABLE OF 800X450
TURNING AND BASCULATING
HEAD ON SWIVEL SLITTER
WITH ISO 40 MOTORIZED DESCENT
OVERALL DIMENSIONS 1300X1300X1800H PESO23Q. APPROXIMATE DATA
|
 |
ITA3980B | 000 | INGERS MILLING MACHINE | UNIVERSAL HEAD, TABLE 800X180 |
 |
ITA 1815 | 000 | MILLING MACHINE TIGER N2 | TABLE 1100X270, ROTATING HEAD |
 |
ITA4347 | 000 | TIGER N2 MILLING MACHINE |
WITH ISO 40 UNIVERSAL HEAD
QUICK ON THE 3 AXES
TABLE 300X1310
TOURS FROM 30 TO 1600
WITH BRUSH FOR HORIZONTAL TREE
WITH SAFETY PROTECTION AND MICRO
TURN WELL, IT WORKS WELL
MACHINE VALID BEAUTIFUL
OVERALL 1800X1900XH1900
|
 |
ITA 1194 | 000 | FRITZ WERNER MILLING MACHINE |
Grinding Machines And Hones
| COD. | BRAND | Machines | DESCRIPTION | |
 |
ITA 3304 | 000 | LODI GRINDING | GRINDER 200, TABLE REVOLVING, WATER PUMP |
 |
ITA4165 | 000 | BIG DOUBLE GRINDING MACHINE ON SPECIFIC BASE, GRINDER DIAM500 | MEASURES 1300X800XH1300 WEIGHT 600KG APPROXIMATED DATA FUNCTIONING MACHINE |
 |
ITA4164 | 000 | DOUBLE GRINDING MACHINE, GRINDERS DIAM 300, ON SPECIFIC STAND | MEASURES 700X500XH1000 WEIGHT 130KG APPROXIMATED DATA |
 |
ITA 154 | 000 | GRINDING MACHINE | 1000X200 |
 |
ITA 3698 | 000 | GRINDING MACHINE WALTER | MAGNETIC TABLE 400X200 |
 |
ITA3920 | 000 | DOUBLE GRINDER WITH CANVAS HOLDER WITH RECLINABLE SUPPORT PLANS | FUNCTIONING MEASURES 1200X700X1400 WEIGHT 250KG APPROXIMATELY |
| COD. | BRAND | Machines | DESCRIPTION | |
 |
ITA 3171 | 000 | FBM330 HYDRAULIC BAND SAW | WITH PUSHER, AUTOMATICA DESCEND |
 |
2365 | 000 | VERTICAL TAPE SAW FOR WOOD | HAS PULLEY TO GET THE ROTATING FORCE FROM A TRACTOR OR AN ENGINE |
 |
MARZ19 | 000 | SCORTEGAGNA MOD. E460 SAW |
WITH MOTORIZED VICE,
ELECTRIC CONTROLS ON THE SIDE OF THE MACHINE AND ON THE FRONT,
ADJUSTMENT OF DESCENT SPEED AND ASCENT WITH ADJUSTMENT REGULATOR WITH QUICK RETURN,
HYDRAULIC OIL IN PLACE,
LUBRICATION IN PLACE,
PUMP WATER IN PLACE,
MACHINE PROVIDED READY FOR USE
|
 |
ITA 3978 | 000 | ||
 |
ITA3299 | 000 | DISK TRUNKER DIAM.315 | MEASURES 1000X700XH1400,WEIGHT 250 KG |
 |
ITA3015 | 000 | DISK TRUNKER DIAM.315 PNEUMATIC, AUTOMATIC | |
 |
ITA3944 | 000 | MEP V275 CUTTING MACHINE | DIAM315 |
| COD. | BRAND | Machines | DESCRIPTION | |
 |
ITA4228 | 000 | COMPRESSOR 300 LITER | |
 |
ITA4109 | 000 | 7,5KW COMPRESSOR | WITH TANK AND DRIER, WITH BOOK'S MACHINE |
 |
CART P | 000 | POWER SYSTEM COMPRESSOR | MOD. PS405 8 BAR/5,5KW/400V/50HZ |
| COD. | BRAND | Machines | DESCRIPTION | |
 |
949 | 000 | WELDING SYSTEM 2 WELDERS | 2 MOBILE MOTORIZED HEADS
ADJUSTABLE REVOLUTIONS POSITIONER
2WELDERS 300 WORKING CAPACITY DIAM.1.000 – 11.000
LENGHT 1.000 OR MORE |
 |
ITA4277 | 000 | ||
 |
ITA3298 | 000 | WELDER | PNEUMATIC PEDAL ARMS 600 MEASURES 1200X500XH1500,WEIGHT 230 KG |
 |
ITA3443 | 000 | WELDER MACHINE CEA 20KW | |
 |
ITA877 | 000 | WELDER PEI ELECTRIC PEDAL, LIGHT BLUE 23 KW | HAS TO BE TRIED COLL.380 2 PHASES + GROUND WITH NEW VALVE |
 |
ITA4175 | 000 | PEI WALL UNIT WELDER 15/20 KW | ARMS MM550+70 BUTTIN AND PEDAL CONTROLS SIZE 11000X400X300 WEIGHT 60KG APPROXIMATED DATA |
 |
ITA3169 | 000 | TECNA WELDER 60 KWA | ARM LENGHT 1000, SHAFT 550 CONTROLS AND ADJUSTMENTS WITH CARD ELECTRICAL PEDAL SIZE 1500X400XH1300, WEIGHT 300 KG |
 |
ITA4145 | 000 | WIRE WELDER D 500A SIEV MOD.FILCORD 500SCR | COMPLETE WITH NEW WATER-COOLED TORCH RECENT MACHINE, READY FOR USE SIZE 1100X700XH1200, WEIGHT 200 KG |
 |
ITA4052 | 000 | WIRE WELDER MIG 30 | TORCH AND MASS |
 |
ITA3100 | 000 | SIEV WIRE | |
 |
ITA 3253 | 000 | WELDING TIG | |
 |
ITA 3684 | 000 | TIG COLGO 250A WELDING MACHINE | |
 |
ITA 3647 | 000 | METRABLAC 150A WELDING |
| COD. | BRAND | Machines | DESCRIPTION | |
 |
ITA3849 | 000 | IMS 45T. PUNCHING MACHINE | CE, PHY45, HYDRAULIC |
 |
ITA 4284 | 000 | OMERA MEC PUNCHING MACHINE |
ELECTRIC PEDAL CONTROL
INCAVO500
WITH VARIOUS PUNCHES IN CASSETTE
OVERALL DIMENSIONS: 1500X1000XH1850 WEIGHT24Q APPROXIMATE DATA
WORKING
|
 |
ITA2851 | 000 | PULMAX 21 TON PUNCHING MACHINE | USED, CONTROL MONOPUNCH SLIDING SPHERES BASE Pulmax 210 PUNCH ,MATRICULATION p210 dmc 71800-02, IS LINKED AND CAN ONLY WORK WITH 220 v TRIPHASE,ONLY THE PUNCH ENGINE STARTS BROKEN VIDEO- CARTS ARE NOT FUNCTIONING ,ELECTRIC SYSTEM IS MISSING. |
 |
ITA4046 | 000 | OMES PUNCHING MACHINE | T30,WITH EQUIPMENT |
 |
ITA4094 | 000 | TRUMP PUNCHER MACHINE | |
 |
ITA 2095 | 000 | TRUMPF PUNCHING MACHINE | ALL ACCESSORIES |
 |
ITA4297 | 000 | FICEP 20 UNIVERSAL CUTTING MACHINE | OIL BATHROOMS, MECHANICAL MECHANICALS SHARPENED BLADES, TURNS GOOD SIZE WELL LUBRICATION OK ROUND CUTS DIAM58 TAGLI QUADRO 50 CUTS ANGLE 150X100X15 HOLE DIAM35X22 INGOMBRO1700X1000XH2300 PESO35 Q. APPROXIMATE DATA |
 |
ITA4312 | 000 | OMERA CUTTING MACHINE |
| COD. | BRAND | Machines | DESCRIPTION | |
 |
0000000000 | 000 | DRYER FOR CUTLERY | 2003,CE |
 |
ITA 3560 | 000 | EUROPA 92HOOD | |
 |
..... | 000 | VACUUM CLEANER | |
 |
.... | 000 | SMOKING SPEAKER | |
 |
ITA1831 | 000 | HOOD CORAL | |
 |
ITA4293 | 000 | GANBAZZI | |
 |
ITA4050 | 000 | ELECTRIC TROLLEY ZEN MAC | WATER PUMP, 1 PERSON, ASCENT AND DESCENT WITH ELECTRIC MOTOR |
 |
ITA4075 | 000 | CARER FORKLIFT | SCOPE16Q. |
 |
ITA 2079 | 000 | FORKLIFT CATERPILLAR 20Q. | |
 |
ITA4283 | 000 | JUGHEINRICH ELEVATOR TROLLEY FROM 16Q.LI, UP TO 16MT | COMPLETE WITH 2 BATTERIES (NEW € 6500) COSTAVANO 2650X1520XH2380PESO60Q. + 35MONTANTI APPROXIMATE DATA COMPLETE WITH BATTERY CHARGE THE MACHINE IS PRESENTED WELL, ORIGINAL PAINT |
 |
ITA 3738 | 000 | LIFT TRUCK DIESEL 30Q | |
 |
ITA3851 | 000 | CRANE 10TON | |
 |
ITA4091 | 000 | 10 TON ORMIT CRANE | COMPLETE |
 |
OS | 000 | EVIDER AND SUPPORT |
FROM 2000 FOR SHEAR
COMPLETE WITH AUTONOMOUS ELECTRIC PANEL
ENHANCEMENT 2400X2000XH1000PESO00KG APPROXIMATE DATA
|
 |
ZAN | 000 | AUTOMATIC PALLET BAND IMAC | |
 |
ITA4338 | 000 | ||
 |
ITA | 000 | ||
 |
ITA 3065 | 000 | CRANE JIB | |
 |
745000 | 000 | MOTORHOE P60 | GASOLINE |
 |
OTT18 | 000 | DOUBLE SLIDER |
MOD L95 1998
MATR099805381
COMPLETE WITH TELESCOPIC BELT HOLDER
EC 2 SPEED MACHINE
|
 |
1 | 000 | TAPES CONVEYOR | VARIOUS |
 |
2 | 000 | CONVEYORS TAPES | |
 |
ITA 3702 | 000 | PROJECTOR HELIOS | |
 |
PUNTE E FRESE | 000 | ||
 |
ITA1596 | 000 | 76 CLOOS ROMAT ROBOT | |
 |
ITA 3988 | 000 | BACRI SLOTTING MACHINE 160 | ADJUSTABLE STROKE,SWIVEL TABLE |
 |
CAM MAR19 | 000 | ||
 |
TAV3 | 000 | CAST IRON TABLE | WEIGHT7220 |
 |
TAV2 | 000 | CAST IRON TABLE | WEIGHT6450 |
 |
TAV | 000 | CAST IRON TABLE | WEIGHT8760 |
 |
viv | 000 | ||
 |
...35 | 000 | TRACTOR |
| COD. | BRAND | Machines | DESCRIPTION | |
 |
ITA4279 | 000 | CERINI A KEY 65 TON PRESS |
TABLE800X500
LIGHT ALL APERTA400
DOUBLE FLOOR
RACE FROM 15A100
PUSH BUTTONS AND PEDAL INCLINABLE STEEL MACHINE
INGOMBRO900X1150X2130 PESO28Q. APPROXIMATE DATA
IT DOES NOT HAVE GAMES
VERY BEAUTIFUL
|
 |
ITA4280 | 000 | COTELLI 40 TON PRESS |
A KEY
TILT
PIANO 570X400
LIGHT ALL OPEN330
ADJUSTABLE RACE DA10 A100
WITH PEDAL AND BUTTONS
1000X900XH2120 ENGINE INCLUDING APPROXIMATE DATA
NEW RACING, READY TO USE, HAS NO VERY BEAUTIFUL GAMES
|
 |
ITA831 | 000 | ROCHE ECC PRESS 60 | A KEY, WITH BALANCER, FIXED STROKE150, LIGHT600 |
| COD. | BRAND | Machines | DESCRIPTION | |
 |
ITA4332 | 000 | AUREBAC BENDERS PROFILE MACHINE | WITH EQUIPMENT |
 |
ITA4262 | 000 | REDAELLI BENDER PROFILES MACHINE | MECHANICS TREES DIAM45 2 PULLING ROLLER + THE CENTRAL MOBILE WITH HYDRAULIC PISTON SIZE 700X800XH100 WEIGHT 300KG APPROXIMATE DATA |
 |
ITA 4317 | 000 | BENDERS PROFILES MACHINE TAURING50 |
| COD. | BRAND | Machines | DESCRIPTION | |
 |
ITA4239 | 000 | ARCOSYSTEM PIPE BENDER DIAM.50 | COMPLETELY HYDRAULIC MACHINE WITH VICE-HOLDING TOOL WITH CONTROL CEB 1 AXIS MACHINE WITH 5 SET OF EQUIPMENT: DIAM.48,3-42,7-33,5-1”1/2- 26,7 CONTROLS WITH 2 PEDALS THE MACHINE IS PRACTICALLY NEW WITH CONTROL BOOK SIZE 5200X1000XH1500,WEIGHT 10Q.LI APPROXIMATED |
 |
ITA4331 | 000 | BLM TUBES BLM TYPE A25-1 |
MATR.200.803.00
LUBRICATION WITH APPROPRIATE MANUAL PUMP
NOW MONTA CARRUCOLE X DIAM.18
WITH CASSETTE OF EQUIPMENT
USED
|
 |
ITA4330 | 000 | CURVED POSITIONS WITH CONTROLS ON THE ELECTRIC KEYPAD, COMPLETE WITH HYDRAULIC RETRACTABLE SOUND HOLDER. |
| COD. | BRAND | Machines | DESCRIPTION | |
 |
ITA693 | 000 | SMALL CORRECTING MACHINE | USED 220 VOLT THREE PHASE |
 |
ITA4336 | 000 | GRINDING MACHINE MININI |
WITH 800X400 ELECTROMAGNETIC TOP
MOLA DIAM.MAX 350
MACHINE WITH INCREASE AND DIAMONDS
HYDRAULIC MACHINE, COMPLETE WITH WATER RECOVERY TANK
DIMENSIONS 330X1700XH2200, WEIGHT 50Q.LI APPROX
REPRESENTATIVE No. 4336 / FEB.19 / SER
|
| COD. | BRAND | Machines | DESCRIPTION | |
 |
ITA823 | 000 | SHARPENER DORMER MOD 48 ENGLISH | USED |
 |
ITA4305 | 000 | 1600X50 RADIAL DRILL |
CE MACHINE
CENTRALIZED LOCKINGS
COMPLETE D CUBE FROM
DIAM 350 COLUMN
TURNS FROM 25 TO 2000
COMPLETE WITH WATER PUMP AND SHIELD WITH MICRO SAFETY
EMERGENCY ON THE FRONT
|
